View Single Post
Old 09-04-2003, 08:23 AM
mbdoc mbdoc is offline
Join Date: Mar 1999
Location: Tucker, Ga USA
Posts: 12,153
The ball-joint BOLTS to the lower control arm & the steering knuckle. All you need to do is support the lower control arm & then unbolt the ball joint. I loosen the nuts w/o removing them & then hit the old ball joint with a hammer to make the taper(s) loosen-up first.
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator
Reply With Quote