View Single Post
Old 09-05-2003, 01:02 AM
sixto's Avatar
sixto sixto is offline
smoke gets in your eyes
Join Date: Jun 2000
Location: SF Bay Area
Posts: 18,745
Re: Engine - Transmission separation help

Originally posted by jrbnc
Coverter bolts maybe,
I hope you were planning to replace the flex plate because yours might be a little bent by now. Don't worry, they're cheap

Yes, there are 6 bolts holding the torque converter (stays with the transmission) to the flex plate (stays with the engine). You get at them through a little window on the lowest end of the forward face of the bell housing.

Don't forget the AT cooler lines, dipstick tube and Bowden cable.

95 S420
91 300SE
87 300SDL
83 300SD
Reply With Quote