View Single Post
Old 09-26-2003, 03:13 PM
Posts: n/a
Resonably sure
The second time it happened I squirted water on the disk assembly and got steam at the center of the disk where the shoes are the outer edges were only warm. When it cooled off I removed the pads and confirmed that there was drag on the brakes I adjusted it and it seemed odd because the brakes would bind at both extreems of the adjustments.I didn't open them up because of the issue of replacing screws.
One thing I didn't mention that got me thinking adjustment is I have a 150" long driveway which I back out of 2-3 times a day and I assume these brakes self adjust when you apply brakes while backing.
I will be opening them up tomorrow and will check the calipers
Reply With Quote