View Single Post
  #11  
Old 09-29-2003, 10:04 AM
Charlie Mitchel
Guest
 
Posts: n/a
Vacume:

By the reading you gave from the pump "you have good vacume." I suspect as you, the damage was done before motor swap out.
I would not try and do a soap rinse. I would replace all rubber lines and connectors. Problem with the soap or brake cleaner, great for cleaning line but when it get's into componets it may screw them up.
If it was me I would start under the hood and replace rubber line's. The plastic lines use the brake cleaner but make sure it is dry before blowing into system.
There is a plastic fuel filter attached that does into the car and is connected to nothing. This is a vent.
You will also see some little blue and black or yellow and black plastic connectors. These are "one way valves." Make sure they work and are in the correct direction.
If you have a digital camera shoot picture other wise make a "good" diagram of all lines before.
There is a ton off vacume on these cars.
Charlie
Reply With Quote