View Single Post
Old 10-04-2003, 08:21 PM
mbz1 mbz1 is offline
Join Date: Mar 2000
Posts: 37
A/C prob

Ok i had a 300e doing that and it was too much distance between the clutch and the pully, all i had to do was take off the clutch and take out a couple off shims to make it closer to the pully and it worked fine after that. what was going on, was the clutch could not travel that far to close the gap and the control would not let it try again after that till i re started the car. hope this helps. you can look at the a/c clutch and see how much of a gap it has it should be real close if you can see daylight through it, it is too far apart..

Reply With Quote