View Single Post
Old 10-28-2003, 04:53 AM
David Speed's Avatar
David Speed David Speed is offline
Registered User
Join Date: Aug 2003
Location: Brisbane, Australia
Posts: 81

When you have this nut loosened the shaft should compress enough to disconnect the centering sleeve at the need to undo the bolts connecting the flex discs to the shaft............I marked the position of the flex discs to their connections as I wasn't planning to replace the discs or centering sleeves........not specified in the manual, but no harm in putting things back the way they were............I used new flex disc locknuts

You probably should consider replacing the center bearing & mount while you are there if it hasn't been replaced recently......also have a close look at the flex discs

Reply With Quote