View Single Post
Old 10-31-2003, 05:25 PM
sshanken sshanken is offline
Registered User
Join Date: Oct 2003
Location: Southern CA
Posts: 10
Originally posted by Gilly
It's normal to have somewhat of a lip on the edge of the rotor, yes. If the lip is too deep you may want to measure the rotor thickness. MB doesn't recommend machining the rotors. If the thickness is still acceptable just reuse the rotors and don't worry about machining.

The rear about the same as the front, yes. Just 2 bolts holding the rear caliper to the bracket, takes a 13mm wrench to remove the 2 bolts.

Thanks for the input. Any comment about Mintex brake pads?
Reply With Quote