View Single Post
  #4  
Old 11-12-2003, 10:00 PM
TomJ TomJ is offline
Registered User
 
Join Date: Sep 2003
Location: Back in Colorado for now
Posts: 1,313
Cont'd.....

The line is cut off so that there's enough straight length to run the fitting onto it:



Here's mods to the fitting so the 15mm oil line will fit:




Fitting is inserted, then the line is flared to keep solder from flowing through to the threads:



Fitting is then silver soldered to the line:



You can see that the solder flows all the way into the fitting and up to the end of the line:



Here's the finished "filter" ends of the lines, ready for install (good thing snow's coming tomorrow, eh?):

__________________
1984 300D Turbo - 4-speed manual conversion, mid-level resto

1983 300D - parts car

1979 300TD Auto - Parts car.

1985 300D Auto - Wrecked/Parts.


=========================

"If you don't know where you are going, any road will get you there". Lewis Carrol
Reply With Quote