View Single Post
Old 12-10-2000, 02:08 PM
Posts: n/a

I am looking at replacing the control arms (top, forward link)on my car as the bushings are "gooey".

The bolts are a tight fit on the chassis end and looks like it would be difficult to get any wrenches on them.

The rotor dust shield looks like it has to be removed to remove the bolt on the wheel side.

I have just rebuilt the front(ball joints/all steering links) and would like to repair the rear before I get it all alined.

JD Hawthorne

'86 300e

Reply With Quote