View Single Post
Old 12-12-2000, 09:07 PM
Michael Haven Michael Haven is offline
Junior Member
Join Date: Mar 2000
Posts: 28
Door panel R&R

remove screws from armrest. Pry out plastic cup behind inside release handle. remove that screw. Remove screws from chrome U at latch. remove screw from rear upper trim at glass.The seat switch buttons pull straight off. Then a plastic c clip on the post. The switch plate tilts out.
Then lift the panel straight up, of the clips. DO NOT PRY.
Reassmbly is the reverse of removal.
Michael Haven CMAT,CMM,L1
MPH Automotive Services
16510 Park Row
Houston, Texas, 77084
Reply With Quote