View Single Post
  #5  
Old 11-27-2003, 09:54 PM
DanielW DanielW is offline
Registered User
 
Join Date: May 2001
Posts: 161
thanks KenP

Thank you for your picture post --- It was the info I needed. I pulled the cap off the relay and re-surfaced the contact points with 600 grit wet or dry paper. The points did not really look too bad at first, however after cleaning with the sand paper everything worked again. Avoiding trips to the dealer or indy is a GOOD THING. Thanks again.
DanielW
Reply With Quote