View Single Post
  #1  
Old 11-28-2003, 11:18 PM
NickMendoza NickMendoza is offline
Registered User
 
Join Date: Feb 2003
Location: Burbank, California
Posts: 184
92 300D 2.5 front control arm bushings help

The car has 298,000 miles on it.

The car starts going to the left right after takeoff. The wheel has a pulse as soon as I hit about 55mph to 65mph. On the fwy it pulls to the left and I have to turn the wheel to the right (a little) to have the car go straight.

Alignment done. They said that the front lower control arm inner (away from tire) are cracked. Could this cause the pulling problem?

The wheels have been bal. inside and outside per request. Thanks to Larry Bible.

I have done all of the rear control arm bushings last week.

Fear=front coil springs. The rears were not that hard to do. The fronts are another story.

The front does not look that diff. Help with a rec. on a spring comp. tool.

What else should I replace: ball joints, sway arm bushings, or ?

Thank you

Nick Mendoza
Reply With Quote