View Single Post
Old 11-29-2003, 02:42 PM
tonyhito tonyhito is offline
Registered User
Join Date: Nov 2003
Location: Chepel Hill, NC
Posts: 7
EGR hot inlet pipe

In order to clean the hot inlet pipe you do not need to remove the intake manifold. The easiest way to disconnect the pipe is from under the car. There are two bolts that hold it. The front bolt (when facing the engine can be removed from above, the rear one from below. If it is really clogged up like mine, use a drill bit by habd to clean out the manifold side, and just be creative with the pipe itself. You can use a coper wire, speedometer cable, etc. At the end I blew air from the egr end which I disconnected
Reply With Quote