View Single Post
  #2  
Old 11-30-2003, 09:49 PM
engatwork's Avatar
engatwork engatwork is offline
busy
 
Join Date: May 2000
Location: Soperton, Ga. USA
Posts: 11,773
Once you pull the panel it is pretty straight forward. The '84 panel is removed in the upward/outward position and I would assume yours does too. If I remember correctly there are 3 each 10 mm fasteners that hold the regulator to the door panel. Take your time with it and you will be ok. Make sure you get some plastic vapor barrier back in place prior to installing the panel.
__________________
Jim
Reply With Quote