View Single Post
Old 12-18-2000, 07:40 PM
mbdoc mbdoc is offline
Join Date: Mar 1999
Location: Tucker, Ga USA
Posts: 12,153
Tools needed; right angle bit driver, torx t25 bit, & #2 phillips bit. If you have these then the switch can be replaced in 25-30 minutes. The wood trim on the ash-tray must come off first. And the plastic trim around gearshift. Then you will need rt/angle driver w/T25 bit to remove 2 bolts that hold the 2 pieces of wood together. You get to them thru area by ashtray wood was removed.
Reply With Quote