View Single Post
Old 12-20-2000, 01:19 AM
JCE's Avatar
JCE JCE is offline
Down to the Wear Bars
Join Date: May 1999
Location: So Kalifornia
Posts: 2,189
To properly aim your Euros, read the section at: I believe they say to aim them on low beam only.
Also, is it possible that the low beam filament is burned out on one side? This wouldn't affect the high beam pattern, but you would see a difference in the low beam light. It could be a defective bulb as well. Try swapping bulbs from left to right. If the problem follows the bulb, it is a bulb problem. If it stays with the same headlight regardless of the bulb, it is a wiring or connector problem. If it goes away completely, it is dirty contacts or a sloppy connector.

[Edited by JCE on 12-20-2000 at 01:24 AM]

2003 Firemist Red/grey leather SL 500
2015 Palladium Silver/black mbtex GLK 350
1987 Smoke Silver/burgundy mbtex 300E Sportline (SOLD)

Click to see 87 300E
Reply With Quote