Thanks for your help so far! As far as the back chamber in the master cyl., I did run it out the first time I bled the brakes and learned to overfill to fill it. I've also learned to pinch the brake lines and open the bleeders when pressing the caliper pistons in! But I can't back up so what do I do now? Do you think that I have damaged something in the ABS? Can it be rebuilt or disassembled and cleaned? Would it do any good to run a can or two of fluid through the system to make sure there is no air and to flush out any dirt? I can't help but think that the ABS unit needs to be bled but my ABS unit looks nothing like the one in the CD manual and has no bleeder? Any help will most appreciated!