View Single Post
  #6  
Old 12-28-2000, 11:39 PM
Wm. Lewallen
Guest
 
Posts: n/a
240D

Another thing on your crankshaft:if the rod journal is scored too bad you may be able to have that journal built up and then turned to fit whatever size bearing you use. I have done this with good results. The machine shop uses a special welding rod that is hardned.
0.25mm is not 0.10". It's 0.00984. Close but not quite 0.10"
Bill Lewallen Lexington,Ky.
Reply With Quote