View Single Post
  #7  
Old 01-04-2004, 10:54 AM
stevebfl stevebfl is offline
Moderator
 
Join Date: Mar 2000
Location: Gainesville FL
Posts: 6,844
The cam bearings are line bored as a set so they must be replaced as a set. It shows that there are two different part numbers for bearings for 123 cars by chassis number. I am not familiar with the differences. The only difference I know of is the later oil pressure chain tentioner gets it oil through a new channel in the forward bearing. I would have thought all 123 cars had this arrangement. I am looking at a euro EPC so its possible that this isn't true for US cars.
__________________
Steve Brotherton
Continental Imports
Gainesville FL
Bosch Master, ASE Master, L1
33 years MB technician
Reply With Quote