View Single Post
  #3  
Old 01-06-2004, 10:11 PM
prb51 prb51 is offline
Registered User
 
Join Date: Dec 2003
Location: Az
Posts: 79
After changing out the shut off valve diaphragm and inspecting the ignition it turned out to be the primary vacuum line to the switch was partially plugged with gunk. It would hold vacuum etc but the decreased volume slowed the shut down process. That took awhile to figure out. Broke the threaded portion of a screw off and threaded the old line to the new and pulled thru the harness very smoothly.
Reply With Quote