View Single Post
Old 01-07-2001, 08:53 AM
mbdoc mbdoc is offline
Join Date: Mar 1999
Location: Tucker, Ga USA
Posts: 12,153
You need a new regulator. Bending will break "pot" metal. One of the keys to replacement is to remove motor from regulator FIRST. There are 3 holes in door to remove these bolts. IF the new regulator does fit the WARPED door frame then use washers to allow proper fit.
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator
Reply With Quote