Depending on what has been done to your car, I would start with overvoltage relay. Also testing of the sensors involved in keeping the idle circuit steady. There is a decel shut-off switch, idle contact, speed sensor( same as cruise) & air flow position sensor! A good tech should be able to figure what is happening with these sensors. Most common failures are decel & air flow, but any can cause similar problems.

__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator