View Single Post
  #6  
Old 02-06-2004, 10:15 PM
benzfan's Avatar
benzfan benzfan is offline
Registered User
 
Join Date: May 2001
Location: Toronto
Posts: 277
Yes, it is easy, but be aware the fuel you will release is under some pressure. Have a good rag handy. Also, make sure you use ONLY the correct MB O-rings to seal the 2 passages. No other O-ring I was able to find from any other source was quite the same. I had some last for a few weeks, but ultimately the MB ones are best. Don't lose them. Leave a clean rag underneath during reassembly to catch the errant one.
Reply With Quote