Someone told me the switches just "pop" out
____________________________________________________
I just did this job yesterday and here's how it works. The switches are held in place with a small spring clip. Lift up the wood trim and you will see the switch. Unhook the wires going into the switch, just pull them out. Then insert the tip of a very small screwdriver into the spring clip and gently pry on it and the switch will then pop right out of the clip. Nothing to it. If your switch is bad you can order a new one from FastLane for around $25 plus shipping. A lot better than paying a dealer $100 for the same job.

__________________
1986 560 SEL (159K miles)