I've said this before,
You don't need to add any solder. The board has plenty already... you need to remelt the solder and it must flow out properly on the connection/wire/board. The best flux for electronics is RMA. You can buy something like a gluestick with the flux for $2-3. Just dap a little on and heat the joint with the soldering iron. If it doesn't flowout perfectly try again with a little more flux.
Michael
__________________
Michael McGuire
83 300d
01 vw A4 TDI
66 Chevy Corsa
68 GMC V6 w/oD
86 300E
|