I put my car up on Ramps and checked it out underneath. I noticed that there are two thin bars that connect to the center crossmember under the engine and go out diagonally to the outer part of the body. The bar on the passenger side is bent. The majority of my shakes reside on the passenger side of the car and they make their way accross. I am going to remove these stiffening bars(?), straighten them out and then remount them. Or should I buy new ones? and how did it get bent? It only has about a slight bend in it, not much. I ordered a new set of wheels too, so those may help as well. I had the entire undercarriage checked when I bought it and they just recommended alignment as well as repairing all the oil leakes it had. I put the hard top back on, I love the car with the top down, but it drives so much better with the hard top mounted. I will keep you posted! Thanks
Regards,
Brian