Here is a pic of the pullers I used on the spindle. The smaller one was OK for the upper ball joint but not the lower. The larger one worked great on the lower ball joint. I positioned it on the lower ball joint, tightened it and the joint separated while I was reaching around to get my hammer. (Yes, I left the nut in place).
(fixed a spelling error)
__________________
Regards
Warren
Currently 1965 220Sb, 2002 FORD Crown Vic Police Interceptor
Had 1965 220SEb, 1967 230S, 280SE 4.5, 300SE (W126), 420SEL
ENTER > = (HP RPN)
Not part of the in-crowd since 1952.
Last edited by wbain5280; 04-25-2004 at 03:41 AM.
|