View Single Post
Old 02-10-2001, 06:55 PM
Carrameow Carrameow is offline
Coming back from burnout
Join Date: Jun 1999
Location: in the Pacific Northwest
Posts: 2,274
Finally pulled the interior door panel today (I got the guts to pull an engine but messing with mercedes trim is terrifying!!!) I found why the fuse was blowing right away. All the bolts holding the power regulator assembly were completely loose, the whole thing was flopping around. I tightened everything up, put in lock washers.
Now I notice however that the power regulator assembly at the end of its travel cycle (window down) still flexes a little as if something isnt quite aligned. I adjusted the down window stop as best I could, but the thing still quivers a little.\
(1) Are there any adjstment procedures?
(2) What should I use for lube--right now I put Vaseline over evreything..
(3) Should itflex slightly?
Reply With Quote