O.K. I took all day Saturday off to end up MAKING the 3 wire harness in question. Thanks G-Benz! I did as you said: Completely removed the old wires, took it inside and measured off same length wiring of the same colors and made new wiring, and soldered the original connectors onto the new wiring, and then reinstalled the whole thing....just before I gave it a try, I double checked everything and made sure each wire went to it's appropriate location......EXCEPT now the oil pressure gauge is pegged at the "3" position (just like in the case with G-Benz) and the low oil indicator light is "ON" permanently.....what could have gone wrong? As a reminder, the pressure gauge and indicator lights were working properly before I attempted to change the harness...could these sensors have been damaged when the stripped wires touched? or when replacing the wires? Any ideas appreciated! Thanks!
Andrew Montoya