View Single Post
  #5  
Old 06-01-2004, 05:02 PM
Duke2.6 Duke2.6 is offline
Registered User
 
Join Date: Mar 2003
Location: Southern California
Posts: 2,293
Also check the throttle position switch. It's located under the flow sensor at the end of the throttle shaft. You can pull the pigtail off at the harness connector on top of the manifold. There is a WOT and idle signal line, plus a common ground.

This switch is often overlooked when dealing with idle speed control problems. It was the cause on my car, and once I cleaned around the switch and got good continuity on the idle signal the high idle went away.

Duke
Reply With Quote