View Single Post
Old 02-26-2001, 10:27 PM
300EVIL's Avatar
300EVIL 300EVIL is offline
Moderator Incarnate
Join Date: Apr 2000
Location: Lake Geneva, WI.
Posts: 1,676
its not too complicated, but hard to explain. ill try though.
well,,, there is a 10mm. bolt in the door closing handle.
remove the black plastic face around the door handle with a flathead screwdriver. ( be careful not to tear anything!)
remove the bolt. next, remove the screws on the plate that goes around the assembally that latches the door.
then unscrew the door locking knob. lastly, there are two long screws under the armrest unscrew these and carefully pull up on the door. its fiberboard ya know! i hope this helps. best if you get a manual. i figured this out by myself, so, its ont too hard if i can do it.
good luck!
Current Stable:
01 ML55 AMG
92 500E (a few mods)
87 300E (lots of mods)
00 Chevy 3500HD Diesel Box Truck
68 18' Donzi Marine
06 GT i-Drive7 1.0 Mountain Bike (with GPS!)

PREVIOUSLY OWNED:83 300SD, 87 420SEL, 88 420SEL, 90 420SEL, 86 560SEL, 86 190E 2.3-16V AMG, 94 E320

Reply With Quote