psfred,

Yes, it's the original Becker GP, but the faceplate was on snug. I had to pull it off to remove the radio, and it was tight and sitting flush with the main case. The wiring that I can see all looks factory original, no splices or funny connectors, so I don't think that's the problem.

I'm going to try and pull the complete center console out this weekend to inspect the wiring more completely. Can anyone tell me the best way to go about this?

Also, what voltages should I be seeing at the connectors with the ignition switch on? There's one 4-pin connector with brown, black/yellow, purple and red/white wires and another 4-pin connector with only one wire that's brown/blue.


Thanks,

Gary