Thanks Arthur, the fan works!!! I switched out fuse D (which actually looked O.K. anyway and is now being used as the fuse for the window switches). I also took out the aux. fan resistor, which was noticably brittle with a very rusted inner coil. I am just a bit confused because the fan works right now with or without connecting the two wires that ran to each side of that resistor. Is it possible that the fan is wired in such a way that the electricity can bypass the resistor if it is not present, but the resistor will "trap" the current if it is hooked up, but not conductive?

Electronics boggles me, but I do enjoy it.

__________________
headrivenoise... listen.