View Single Post
  #11  
Old 09-01-2004, 12:55 AM
Arthur Dalton Arthur Dalton is offline
Registered User
 
Join Date: Aug 1999
Location: Florida / N.H.
Posts: 8,804
Code 11 is Closed throttle recognition fault or Electronic accellerator [EA]problem.
First thing is to see if the cable has a little slack It should and there is an adjustment . Also check that the pedal is working free [ nut bunched up rug, etc]

The reason for blown fuse on pin 16 is that pin 16 is actually Pos12v , not a diagnostic plug.
Pin 10 is mute
The tool you made is universal , whereas the one for your car specific would use pin 1 for ground, pin 16 for B+, and the other lead will be the probe/test lead that goes to the designated sockets.
You can modify your by simply putting banna plugs on the pos and neg ends of the tool and use pin 1 and 16 for power...then you do not use the battery for power, rather , all 3 bannas go to the diagnostic socket.
Reply With Quote