View Single Post
  #6  
Old 10-04-2004, 03:00 PM
LarryBible
Guest
 
Posts: n/a
Describing the procedure for drawing the CC system diagnostics is a very lengthy and detailed post. To save me a very long time in writing it, could you please do a search on Climate Control Diagnostics or some such to find the threads. There are some threads that go into this in great detail.

The fuse box is a rectangular, black plastic box that is in the area near the master cylinder It is about a 1 1/2 inches long and a half inch wide with a cover that snaps loose to unhinge and reveal the fuse. This is a strip fuse that is about an inch or more long and a 1/4 inch wide. There is a screw on each end of it. At the screw is where it will stress crack sometimes and give intermittent contact.

I am trying to get ready to go out of town on a business trip so I don't have time to take a picture. If you were to search on blower motor fuse, you will probably come up with a thread or two where a picture has been posted.

Good luck,
Reply With Quote