View Single Post
  #5  
Old 11-07-2004, 10:20 AM
400E_FAN's Avatar
400E_FAN 400E_FAN is offline
Registered User
 
Join Date: Jul 2003
Location: Massachusetts
Posts: 78
Control Arms Done

Update on this thread:

-Finished replacing both front control arms (with new ball joints and a-arm bushings) with Febi-Bilsteins.... with some big help from a friend!

-HUGE difference in ride quality....the old ball joints were a little "loose"
but the bushings did not visually look that bad. Finally, rides like a mb should...it had always seemed very "discombobulated" over small bumps and imperfections in the road.

-Need to get a camber/caster alignment but I am holding off until I can get a new set of strut mounts in there.... and possibly tie-rods...that should get the front end into near original condition except for the struts.
__________________
Matt
____________________________
92 400E 128K
99 GMC YUKON 88K
Reply With Quote