View Single Post
  #7  
Old 12-22-2004, 12:41 AM
Tinker Tinker is offline
Registered User
 
Join Date: May 2000
Posts: 376
You might only need one or two shims. After you measure, you can usually juggle around the ones on the motor to correct the tight/loose valves.

My local dealer stocks a "shim kit" that has an assortment of sizes and I just picked out the two I needed the last time I adjusted mine.

Make sure you loosen the cam retainers evenly so you don't damage a cam.

Tinker
Reply With Quote