View Single Post
Old 04-10-2001, 11:24 PM
JDUB JDUB is offline
Registered User
Join Date: Apr 2000
Posts: 412
Take off the A frame and have them pressed in at a shop that does pressing out of bushings and ball joints. If you have the arm off have the bushings in the arm replaced also. The ball joints on these lower arms are pressed in at a slight angle and it is very difficult to do without the proper tools.
1990 190E 2.6
1996 Grand Voyager 3.3
1985 Mustang GT 5.0 5 SPD
1982 Suzuki GS 750T
Reply With Quote