I have my diff on my work bench and want to replace the three seals in the unit. I have taken off the back cover and removed the clips and replaced the two seals where the axles go. I put it back together and now I want to replace the seal where the yoke is. I need to get a 30mm deep socket and let me tell you no one has it. What do you do in this case?? Secondly I am not sure if I need to pull out the gears to get to where the seal is located. I need to know if I need to pull everything out or can I put the seal in from the front. And could someone please explain how you get the drag set when I take the yoke nut off. Any help would be greatly appreciated.
George