View Single Post
  #10  
Old 02-13-2005, 12:43 AM
A264172 A264172 is offline
Ta ra ra boom de ay
 
Join Date: Jun 2004
Location: Pittsburgh
Posts: 1,915
rookie hits the driveway

did 3 tests
1) at X11 (ignition on engine off)
pin 3 red banana to V/F/C/Ώ/mA/uA
pin 2 black banana to COM
Dial set to % duty
reading 30.1

2) at X11 (engine running)
pin 3 red banana to V/F/C/Ώ/mA/uA
pin 2 black banana to COM
Dial set to % duty
reading 50.6

3) in passenger footwell
black wire lead from OČ Sensor to red banana to V/F/C/Ώ/mA/uA
aligator clip to front right fender inside engine compartment to black banana to COM
Dial set to % duty
reading 0.0

Am I doing this wrong?
__________________
-Marty

1986 300E 220,000 miles+ transmission impossible
(Now waiting under a bridge in order to become one)

Reading your M103 duty cycle:
http://www.peachparts.com/shopforum/831799-post13.html
http://www.peachparts.com/shopforum/831807-post14.html

Last edited by A264172; 02-13-2005 at 03:47 PM.
Reply With Quote