View Single Post
  #2  
Old 03-06-2005, 01:06 PM
leathermang leathermang is offline
Registered User
 
Join Date: Sep 2001
Location: central Texas
Posts: 17,281
Clean the hole really well... like with Brillo pad and then alcohol ... also do that to the shortest bolt you can find which has the largest head which will fit into that hole.
Then mix up a small amount of the strongest epoxy you can find... JBWeld, etc... and place the bolt head in there and leave at least 24 hours without allowing it to move...... . depending on temperature...
Then take a couple of nuts which fit on that bolt and screw them onto it...and use them with a breaker bar to loosen it.
If you need to put your car jack into the hole on the right rear of the car...and attach a comealong to the breaker bar... this gives you a lot of force but in a controlled way.... not like an air wrench... I have posted pictures of that arrangement in the archives..
Reply With Quote