Quote:
|
Originally Posted by JimmyL
My M.C. is rather stained, and very hard to see through, if not impossible. Is that how one would tell. Also, my rubber 'seals?' in between the plastic of the reservoir and the metal are VERY cracked. Is this going to (or could it) compromise my seal when I use the bleeder?
|
I would replace the reservoir and seals before bleeding, call Phil.
The reservoir has a wall dividing it in half, if it is not clear and clean there is little chance of you ever seeing when the rear half is empty.
Spray wand is used on my rig, I can start and stop flow with the locking trigger = #7 Lock trigger open.