View Single Post
  #4  
Old 03-15-2005, 02:02 PM
leathermang leathermang is offline
Registered User
 
Join Date: Sep 2001
Location: central Texas
Posts: 17,281
" Also I didn't note which way the rod cap was oriented on the rod,"

That is one of the kinds of warnings they have in the engine manual... some of which are not found in the Haynes...

Can you tell by looking at the other rods which way the cap was positioned ?

Improvements and changes happen on bearings all the time.... you would need to check official sources and/or Tech Service Bulletins to find if the non groove ones are ok to use..

I have always liked grooves in bearings.
Reply With Quote