View Single Post
  #2  
Old 04-25-2001, 10:51 PM
engatwork's Avatar
engatwork engatwork is offline
busy
 
Join Date: May 2000
Location: Soperton, Ga. USA
Posts: 11,773
Look at your calipers

and make sure you do not see any fluids coming out of them but it sounds like a classic example of a master cylinder going bad. Easy job and the parts are not too expensive from Partsshop.com. You need to make sure you "bench bleed" the master cylinder before putting it on the car.
Jim
'85 300D
'95 E320
'97 CRV
Reply With Quote