M103 Fan Bearing Bracket Sealant
Engine M103, 1992 300E
I am going to replace this assembly due to noisy bearing.
I have the tool for locking the fan pulley.
MB Shop manual calls out a sealant for one of the bolts.
Apparently this bracket has a bolt in common with the belt tensioner.
In job no. 13-345 they refer to the sealant with two different part nos.
001 589 29 20, then one page later as 001 989 29 20. Looks like a typo.
Searched the archives to no avail.
Not really concerned with which one is correct, but what non-MB
sealant should I use?
Thanks,
Steve
|