|
Plug the banjo. Remove the banjo and you will see that it is hollow. Be careful as there are two washers, one on top and theother under it, don't lose 'em.
The hollow hole in the bottom of the banjo has to be filled to avoid vegie going to the main tank. This can be done three ways; get a solid nut (hardest), put a weld in it (gotta know how to weld) or the simplest is to put a screw (the screwable end) into the chuck of a drill and run the head over a flat file check until it can be lightly "tapped" into the banjo hole and held there by pressure. Use a short screw for this.
|