Any problem with any sensor input will cause the CIS computer to go into FOM(fixed operation mode). At that time idle may be at 1200RPM or your case 400RPM. Most likely & common problem is the air flow position sensor. Of course that is if the computer is getting power from OVPR.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator
|