72 250c Zenith Carb Adjustment Help Needed.....
i have just rebuilt my carbs on my new 72 it runs ok but i think i need to fine tune them. i have read and reread many of the posts on this topic through this wonderful forum but can not seem to find one that i need to re read. if anyone can help point me in the right direction that would be great. the post had percise numbers on rpm drops of 25 or 50 when the mixture screws were turned in or out. these would be turned out 1/4 then 1/8 and back in untill the desired numbers were acheived. this post also had other carb sync directions. if you have this info or know of the post your help would be appreciated.
timing done
valves done
ignition done
thanks
mark
|