View Single Post
Old 05-10-2001, 01:48 PM
JDUB JDUB is offline
Registered User
Join Date: Apr 2000
Posts: 412
If your driveshaft is typical of Most Mercedes Benz drivefshafts. The Haynes repair manual recommends drilling a 10mm hole through the old sleeve (all the way through) approximately 15mm from the oute face of the sleeve. Next insert a bar into the 10mm hole and extract the sleeve using a lever on each side. Hope this helps.
1990 190E 2.6
1996 Grand Voyager 3.3
1985 Mustang GT 5.0 5 SPD
1982 Suzuki GS 750T
Reply With Quote