Installed a new temp sensor and resistor last night. The fan kicks in with the A/C on at about 80 degrees. After driving with the A/C on, the car got warmer, and the fan speed went from high to low.
So, I guess I hooked up a wire backward. Which wires would do this? The resistor, the temp switch, or the wires coming off the drier? After all this I know I need a fan, so I'll install this next week.
Thanks for all your help!
88 BMW E32 735i (make it go away)
95 Volvo 960 "Inga" (valve problems)
95 Nissan Maxima (the indestructible)
89 Ford Ranger XLT (ugliest truck in the South)